LHP Industry

Contact
Phone No: (+91) 94284 05256
Email Id: lhp1915@yahoo.com

11 22
Welcome To LHP INDUSTRY
  • Single Gearing
  • Double Gearing
  • Hand Fly Press
  • Double Body Press

GOLDSMITH COMBINE ROLLING MACHINE (SINGLE GEARING)

LHP Goldsmith combine rolling machines are currently manufactured in four models. These, sound construction machines are of single gearing type and electrically operated. They are specially designed for rolling sheet and square section wire. Both heids, each for rolling sheet and square section wire, are fitted horizontally on sturdy base and motion of rollers are controlled by means of separate lever. The main shaft is running in grease-packed antifriction precision ball bearings and whole gearing mechanism immersed in an oil tank. The drive is effected by V-belts, connected with grooved fly-wheel and motor pully, controlled by switch on the machine.

SPECIFICATION

Model CSW-E4 CSW-E5 CSW-E6 CSW-E8
Roller
Working surface......ins 4 5 6 8.50
Diameter.........ins 2.50 2.75 3.75 4
R.P.M............. 48 45 52 52
Rolling Sheet & Wire S & W S & W S & W S & W
Capacity
Max Lifting.........ins 0.21 0.28 0.34 0.34
Feeding Thickness For
Sheet.............ins 0.18 0.25 0.31 0.31
wire...........ins 0.37 0.43 0.50 0.56
Output Per Munite..........Feet 31 32 51 54
Motor 31 32 51 54
Required........hp/kw 1.5/1.1 2/1.5 5/3.75 5/3.75
Required........r.p.m 1440 1440 1440 1440
Space Occupied
Leangth x Depth x Height......ins 40 * 24 * 54 44 * 26 * 58 54 * 32 * 62 56 * 32 * 64
Weight
Net (approx)..........kgs 360 430 660 730
NOTE : All the above machines are suitable for electric operated V-belt drive system.
When ordering machine, to give us the possibility of making the exact connection of electric motor, please always specify the wanted phase and voltage.

GOLDSMITH ROLLING MACHINE (DOUBLE GEARING)

LHP Goldsmith rolling machines are currently manufactured in eight models. These machines are of double gearing type, sound construction and electrically operated. They are specially designed for goldsmiths to rolling sheet and square section wire. A well designed body, extremely sturdy in construction, fabricated of mild steel plates, welded heavily to minimize vibrational stresses, housed the motor. The main shaft is supported by precision ball bearings to consumes less power and saves energy. The drive is effected by V-belts, connected with grooved fly wheel and motor pully, controlled by switch on the machine.

SPECIFICATION

Model DS-E4/DW-E4 DS-E5/DW-E5 DS-E6/DW-E6 DS-E8/DW-E8
Roller
Working surface......ins 4 5 6 8.50
Diameter.........ins 2.50 2.75 3.75 4.00
R.P.M............. 37 36 42 48
Rolling Sheet & Wire Sheet / Wire Sheet / Wire Sheet / Wire Sheet / Wire
Capacity
Max Lifting.........ins 0.50 0.62 0.75 0.87
Feeding Thickness For
Sheet.............ins 0.37 0.50 0.62 0.75
wire...........ins 0.37 0.43 0.56 0.62
Output Per Munite..........Feet 24 26 41 50
Motor
Required........hp/kw 1/0.75 1.5/1.1 3/2.2 5/3.75
Required........r.p.m 1440 1440 1440 1440
Space Occupied
Leangth x Depth x Height......ins 21 * 27 * 50 23 * 30 * 50 26 * 33 * 56 29 * 36 * 59
Weight
Net (approx)..........kgs 200 270 375 415
NOTE : Additional handle cost extra, if required.
I Additional fly-wheel cost extra, if required.
All the above machines are suitable for electric operated V-belt drive system, if required.

HAND FLY PRESS

LHP Hand fly presses are currently manufactured in seven models. These screw presses are well proportioned and designed for carrying out general press work. A carefully casted and machined allover where necessary formaintaining accuracy and efficiency There also provided FOL D'NG BUTCH with sufficient space for easy clamping and removing dies. th'Folding butch are currently manufactured in two models. These are ideal for easy holding and removing dies.

SPECIFICATION

Model L-0 L-1 L-2 L-3 L-4 L-5 L-6
Dia.of screw.......mm 35 40 45 50 55 60 65
Lead.of screw.......mm 44 57 57 67 67 67 67
Start.of screw.......nos 3 3 3 3 3 3 3
Base To Guide......mm 160 175 190 205 220 235 250
Dia.of Base.........mm 170 200 230 260 290 320 350
Hole In Base......mm 40 55 70 85 100 115 130
Base From L To R.......mm 250 290 330 370 410 450 490
Base From F To B.......mm 300 350 400 450 500 550 600
Height Of Body........mm 460 520 580 640 700 760 820
Weight(approx).........kgs 46 95 125 160 200 270 330
NOTE : One ball weightsupplied with Presses Model : L-O & L-1.
Two balls weightsupplied with Presses Model .' L-2 to L-6.
Folding butch and base plate will cost extra, if required.
Above Presses are supplied with holein the bottom ofram size : 0. 75 x 8 TPI, unless otherwise requested.

GOLDSMITH ROLLING MACHINE (DOUBLE GEARING)

'Lhp Double body presses are currently carefully casted and machined allover where manufactured in four models. These heavy duty necessary for maintaining accuracy and presses are well-proportioned and designed for efficiency. Its provided with sufficient space for carrying out heavy presswork. All the presses are easy clamping and removing dies.

SPECIFICATION

Model H-6 H-10 H-14 H-18
Dia.of screw........mm 70 85 100 115
Lead Of Screw..........mm 76 76 89 89
Start Of Screw.........nos 3 3 3 3
Base To Guide.........mm 200 250 300 350
Between Frame...........mm 320 400 480 560
Hole in Ram.............mm 25 30 35 40
Hole in Base.........mm 80 110 140 170
Base From L To R........mm 620 740 900 1060
Base From F To B........mm 400 480 560 640
Hight Of Body...........mm 685 820 1005 1190
Flywheel, Dia.........mm 750 900 1050 1200
Flywheel, Face.........mm 70 80 90 100
Weight (approx).............kgs. 390 705 1086 1557
NOTE : Earn Set and Butch, cost extra, if required.
© 2015 All Copyrights Reserved By LHP Industry Website Design by Global Web Soft Pvt Ltd